Einleitung
Changing the tubes when the Ninja Coffee Bar® Single-Serve System is leaking water from the bottom will require some time but can fix a few problems. Make sure the device is in a secure open area where you will not lose any screws because they are very small. You will definitely want the magnetic pad provided in the iFixit tool kit. Warning: be careful when you take off the protective plate because there are a lot of wires that can not be disconnected.
Werkzeuge
Abschluss
To reassemble your device, follow these instructions in reverse order.
My Ninja has T10 Security-head screws. Several are recessed quite deep in the bottom cover. I found a set of 60mm long security torx bits on Amazon for around $12 The extended length worked great for the deep recessed screws.
Mike Stroven -