Einleitung

  1. jyRHGWcOe1jxPTUx
    jyRHGWcOe1jxPTUx
    XQX5NUCVMJK2i3VW
    yrwoKU2KtNfKJjtg
    • With a thin tool insert it in the cover at the bottom and pry up to release it

  2. uiYDnKkUmPdHxDjD
    uiYDnKkUmPdHxDjD
    YBZ1soyuFYm5UOF6
    • Pry up the two points indicated by the arrows to release the keyboard

  3. FpVGRDR2mnVbrIwl
    FpVGRDR2mnVbrIwl
    Q6v2jHHdxcs3DnrJ
    • Remove battery and battery cover

  4. N6XTQoBlJ4WLOMpW
    N6XTQoBlJ4WLOMpW
    KBvlNvGVsr46RGNi
    • Unscrew the 2 rear screws

    • Unscrew the 2 front screws

  5. Jt3XD2G2goXv1xSL
    Jt3XD2G2goXv1xSL
    rIZPX4vpiAvYb6tc
    n4tbmBUlxU4waTdJ
    • Gently lift the front glass and slide it slightly in the direction of the arrow so you can free it

  6. HKESf1GEicXDFxVB
    HKESf1GEicXDFxVB
    PVPXKKCMxOVDcAfD
    YRQCbyYquGZpokGb
    • if the display needs to be replaced and then you have no problems if it is broken in the door, proceed with a heat source and a thin tool to be able to break it from underneath

    • If the display is as good as in my case to avoid the risk of breaking it, unscrew the two red arrow screws

    • Gradually unscrew the purple arrow screw so that you do not lose too much on the back of the display to avoid breaking it, at the same time lift it from the keyboard area and gradually unscrew Dino to the complete lifting of the display and its housing doing Leva also laterally on the releases

  7. g6UuBsWOmabaqxUK
    g6UuBsWOmabaqxUK
    X6xZvTNW45IpBWxC
    • Lift up display assembly.

  8. knOj4RfXmUyW2tHN
    knOj4RfXmUyW2tHN
    QIbHa3jGQMYlOpPp
    VWFRoxV1JcWwHxR6
    • Disconnect touch screen connector

    • Disconnect display connector

Abschluss

To reassemble the device, follow these instructions in reverse order.

Smilzo

Mitglied seit: 09/11/13

10799 Reputation

0 Kommentare