Einleitung

In this guide, we outline how to unscrew and remove the front case from the Nokia 2630b. This grants access to the LCD screen cover and the keyboard.

  1. CDgcEOQnqEECtLpw
    CDgcEOQnqEECtLpw
    olDrcuFPuDqbMR5t
    • Press each release button on either side of the battery cover and simultaneously remove the battery cover from the phone.

  2. hJo2tQACTsPBteW2
    • Pull the battery out of the phone with your fingers.

  3. LNOF4G4eBaLv6Kj4
    • Remove the two screws on either side of the battery case using the microscrewdriver using the T5 bit

    • The T5 bit has a star shaped end and has "T5" engraved on the side of the bit for easy identification

    • NOTE: Keep the screws in a safe place while you continue working.

  4. t2pQfErAJ3VhHkn2
    t2pQfErAJ3VhHkn2
    o2T2xECOIPchkRy4
    5PCDJOHxglUdcVST
    • Separate the front case from the back case using the iPod opener

    • NOTE: The keypad is a loose piece and may fall out

  5. RySDhhqyjhPE6POl
    • Remove screws using the same T5 screw bit to release the computer chip from the case

    • NOTE: Keep the screws in a safe place while you continue working

  6. Ws1RxMrvFVxOYGgQ
    • Carefully lift the black frame off the screen with your fingers

  7. b6wiGPulluFYSlnK
    • Carefully remove the computer chip and screen out of the black case with your fingers

  8. EJSHvQZi6iEUilAG
    EJSHvQZi6iEUilAG
    DRLx4De4YnESlBai
    • The screen is attached to the motherboard by an orange ribbon

    • Carefully detach the ribbon from the motherboard using your fingers

  9. QOWIkOAEvPPYtkoY
    • Reattach new screen by connecting the orange ribbon to the computer chip

  10. V4ZAcCEbIlNTbj61
    V4ZAcCEbIlNTbj61
    UTRLaXZauH1meDHJ
    • Place computer chip and screen back into black case

  11. u2Tgms5dbd1MtHwN
    • Place black frame back over screen

  12. oIkNkF3Wgy4Twf55
    oIkNkF3Wgy4Twf55
    iYA5BlUjqlrUpuCd
    • Carefully place keypad back in place

  13. ekfisRukTynrbgJs
    ekfisRukTynrbgJs
    GFHCe65Thhvu1vsP
    • Snap the front case back in place with the bottom case with your fingers

  14. MoycRXePCMNJQmbw
    • Reassemble screws with microscrewdriver

  15. gfPF24UvyMZr63BN
    • Slide battery back into place

  16. uY5LNsEKVAFWVOMq
    • Snap battery cover back into place

Abschluss

To reassemble your device, follow these instructions in reverse order. Make sure to snap the new screen / front case securely into place.

Eric

Mitglied seit: 07/04/11

51 Reputation

2 Kommentare

Great guide :-) I have a Nokia 2630 too and people can no longer hear me on calls, even though I can hear them. Do you know what could be wrong? Do you think this is something I could fix myself? Thanks!

jfg -

You could try getting a neodymium magnet and run it across the earpiece grill. In my father's case, a lot of metal powder was in there, pressing in the speaker membrane; the alternative is cleaning it (which does require opening the phone using Eric's very nice guide). The alternative to those is ordering an earpiece online - but usually those are really bad quality, so trying to fix the original one would be advisable

Darie H -