Einleitung

To change or clean the logic board the phone must be dissembled. The tools required will be a T-6 screw driver.

  1. IRADL5PCZMYGCbxO
    IRADL5PCZMYGCbxO
    bAXOrR6oDNsk1tdX
    • Flip the Nokia 3300B over with the back-side facing towards you.

    • Gently press the button on the back of the battery cover to release the cover and slide up.

  2. n5olTn6mVwsehCYY
    n5olTn6mVwsehCYY
    K4PkQI4qfnGPa6Uk
    • Lift the battery out of the back of the phone.

    • It is easiest to lift the battery out of the phone from the right-hand side, as seen in the picture.

  3. uFmgJWVKMAnpFNfe
    uFmgJWVKMAnpFNfe
    TI6Qsy4cE2GQZwJx
    • Gently push the blue tabs on the top of the phone out of their slots.

    • With the phone facing up, pop the blue faceplate off by using your fingernail (or some tweezers) and working your way around the phone.

    • Note: If the blue cover does not detach easily use your finger nails to try and split it open, as seen in the picture.

  4. HNXNAswPeYIMVycZ
    • With the screen still facing you, lift and remove the blue faceplate.

  5. xqpCFjJosMHWMaNC
    • Grab the sides of the keypad and lift each side up vertically, until the keypad is completely removed.

    • If you encounter resistance while removing the keypad, be sure to lift up evenly on both sides to ensure that the pins do not snap.

    • When replacing the keypad, make sure that the plastic pegs all enter their proper holes.

  6. HlsZaFhZ2qjhoVJU
    HlsZaFhZ2qjhoVJU
    IIRE2opGaG3YJrXk
    • Remove the six Torx T6 screws from the phone's front case.

  7. dnO1TLwyDZRk3ULK
    • Pull up on the front case containing the screen to separate it from the rest of the phone.

    • Gently lift the main board out of the back case.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Jose Quezada

Mitglied seit: 13/04/10

50 Reputation

0 Kommentare