Einleitung

Replacing the logic board.

  1. vtsWxXU533iedNS5
    vtsWxXU533iedNS5
    GWH3oQMKYncwy2eG
    gAxE4GDQgEENJxTs
    • Press the grip on the back of the phone and slide the rear housing down towards the bottom of the phone.

  2. k2QYFKtdaopctxvu
    k2QYFKtdaopctxvu
    DkZooeBn3IWhXQ5V
    3MHfv2tBQJl3XyAP
    • Use your finger to gently pull the bottom of the battery up.

    • Lift out battery and remove.

  3. KRWbDKlomBbkcURR
    KRWbDKlomBbkcURR
    QriPkOurwLQNSftv
    qEoaW1NLDF6MnGId
    • Use your finger to lift the metal cage up.

    • Remove SIM card.

  4. qKVopKGdRafRa1Uh
    • Use your finger to close the metal cage.

  5. s6oYwgLPBUoSaKpH
    s6oYwgLPBUoSaKpH
    Fx6XYDtwy2SaaZGN
    iBPXReSUsWKn4jOq
    • Insert both of your thumbs under the two tabs labeled with the arrows and pull the top casing up then slowly rotate up and over the screen.

  6. jxgXgKUJnAOFdx5g
    jxgXgKUJnAOFdx5g
    2OKsSIvSqOCrYqYZ
    • After removing the top cover, turn the phone over so the screen is facing upwards.

  7. bGS3ESYKm1Vtdm2B
    bGS3ESYKm1Vtdm2B
    UXuaooBBnXgT3ixW
    ohhjohH2ZcxVPNre
    • Use your hands to lift the front casing off the phone by pulling above the arrows.

  8. ksLMeOKNJWl5BwQN
    ksLMeOKNJWl5BwQN
    ImkPwuckDrraPPFC
    PsxuQhXafZrLraIC
    • Remove the six screws with a T-6 Torx screwdriver.

  9. VmpHlBvSur5yUqms
    VmpHlBvSur5yUqms
    AUHb14aeRqoOZ5BL
    VAvUNccNOmMjv55T
    • Gently lift the top of the screen up.

    • Be cautious of loose parts.

  10. kANI1if3CmQHZqLn
    kANI1if3CmQHZqLn
    ANLKOspDdKPS5tYp
    tCyHyevP2OLOZYBe
    • Gently pull up on the grey plastic tab.

  11. R6oJbA4LqfNI2rIC
    R6oJbA4LqfNI2rIC
    wCMGWbBFJpDSM4Ek
    Gebb4F3sHGfaaElx
    • Lift off plastic cover.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Spencer Woodworth

Mitglied seit: 14/04/10

316 Reputation

0 Kommentare