Einleitung

Use this guide to remove and repair the logic board.

  1. jJJYdyuODkmBrWiB
    jJJYdyuODkmBrWiB
    gMiOmhWkQJ1DCbR5
    UvHT613DuAUY3LTv
    • Press and hold the button at the bottom of the back side of the phone while sliding the back plate down to remove the back cover.

    • Note: Images on the right side may be hovered over to reveal larger versions.

  2. WBOrmXPDGlymxJea
    • Lift up the battery from the inside of the phone.

    • Make sure to lift up from the bottom of the battery as shown.

  3. QSyFUDcSC4pvJbnq
    QSyFUDcSC4pvJbnq
    4YFrjqHUNEEMblOe
    • Using a .208 head T-6 Screwdriver remove the two screws at the bottom of the battery cavity.

  4. skPTDPBMJWDASOFB
    skPTDPBMJWDASOFB
    UDG6TvFrCLwYFRTi
    • Use a plastic opening tool to remove the silver cover over the antenna.

    • The covering may not pop right off. It may require some prying in different locations around the top covering.

  5. AEecpCOYMxRtFHnc
    AEecpCOYMxRtFHnc
    DJAj4ZlJUCcoV5He
    • Remove the two newly revealed .208 inch screws at the top using a T-6 screwdriver.

  6. WgtONIkLtuLahoOT
    WgtONIkLtuLahoOT
    pTZXXR5BMP3NRhgD
    • WARNING: Use extreme caution when removing and handling the logic board as it is very fragile.

    • With caution, use a plastic prier to separate the back silver casing from the front of the phone. This may require force.

    • Disconnect the logic board from the small orange chip.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Alex Graebe

Mitglied seit: 16/04/10

1 Reputation

0 Kommentare