Einleitung
Installing a new vibration component is necessary when the vibrate mode on your phone is no longer functioning properly. Installation requires no prior knowledge of mobile phone vibrators.
Werkzeuge
-
-
Locate the small button on the top of the phone.
-
Depress the button.
-
With your other hand, pull the front cover away from the phone.
-
-
-
Remove all six 5.3 mm long T6 screws.
-
Remove the circuit board/faceplate sub-assembly from the back of the phone.
-
-
-
After removing the circuit board/faceplate sub-assembly, locate the vibrator mechanism.
-
Remove the vibrator mechanism with tweezers by simply pulling it up and away from the phone.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
