Einleitung
The front camera is an integral part of the Nokia Lumia 900. Because it is a small and delicate component, this guide will show how to remove it carefully and properly.
Werkzeuge
-
-
Insert the pointed end of the spudger into the sim card port indicated by the picture. Then proceed to remove the sim card port entirely.
-
-
-
Separate the screen from the motherboard by prying it open with the spudger along with pulling upwards with the suction cup.
-
-
-
Gently pull apart the screen from the motherboard, with only the ribbons connected from the motherboard to the screen.
-
-
-
Disconnect the No-fuss cables from the motherboard by gently prying them up using the flat end of the black stick spudger. Make sure not to bend or crease the cable.
-
Remove the screen.
-
-
-
Use the iFixit iOpener or another heat source to gently heat the top left corner until the adhesive under the camera softens.
-
Use the plastic opening tools to carefully lift the front camera from the motherboard.
-
To reassemble your device, follow these instructions in reverse order.