Einleitung
Werkzeuge
-
-
Remove the Sim card tray and locking bar, before applying pressure to to the top right corner of the plastic casing.
-
Using the opening tool, pry the screen from the casing until they are separated from each other.
-
-
-
Attach new screen connectors to logic board
-
Slide the hinges of the left side of the screen under the left side of the plastic case
-
Clamp the right side of the screen down and make sure screen is flat
-
The screen should "click" into place
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
This guide is forgetting to mention you have to take out the Sim card tray and the locking bar that holds the LCD in, if you don't you will break the housing and screen.
Matthew Babcock -