Nook Tablet Back Cover Replacement

Geschrieben von: Jacob Metzinger
  • Kommentare: 2
Nook Tablet Back Cover Replacement

Schwierigkeitsgrad

Easy

Schritte

5

Zeitaufwand

2 - 5 Minuten

Einleitung

This guide will show you how to remove the back cover revealing the battery. This will allow you to access the inside of the nook tablet and will act as prerequisite for most of the other guides

  1. kAcWywTOyYMOPVq2

    • Flip the Nook over.

  2. ofqiDrHoLbXqMNAP
    ofqiDrHoLbXqMNAP
    GYLjQTksX2wfpEc3

    • Lift the flap that reads "Nook" to reveal the tape that is underneath. Remove the memory card if one is present.

    • Remove the tape covering the round holes to reveal two T5 Torx screws.

    • Remove the two T5 Torx screws securing the back cover.

    Remove stickers covering T5 screws and remove screws

    badbyz -

    Also, remove the mini SD card first or you may break it taking the back off.

    54pontiac -

  3. GgiGCdQEfPy4YH5Q
    GgiGCdQEfPy4YH5Q
    Pf1FM115ASlBemmI

    • Insert the flat end of a spudger between the front panel and the rear assembly.

    • Though these photos show a screwdriver, use a spudger or plastic opening tool in order to prevent damage to the device.

    • Use a spudger to lift the the back panel from the rest of the Nook.

  4. DE1CfPeOKaqUcbVO
    DE1CfPeOKaqUcbVO
    GHweUYOb4DoSQJdR

    • Slide the spudger around the edges of the Nook to loosen the back panel.

  5. TCLfPJgEQpIac6vg

    • Pull the back panel off the Nook.

Abschluss

To reassemble your device, line up the piece that was removed with how it was on before and then just firmly press down till it snaps into place.

Tinte & Feder

Jacob Metzinger

Mitglied seit: 26/09/12

89 Reputation

0 Kommentare