Nutri Ninja Ninja Blender Duo BL641 Body Disassembly

Turn blender upside down

Remove these six screws (0.5 inch 5 gauge phillip's head)

Note: 2 of the screws will be star shaped circled in blue

Lift the bottom panel off

Unscrew and remove these six phillip's screws. (0.5 inch 5 gauge phillips)

Note: The screws circled in blue are 1/8" longer and have a slightly different top than the rest. These are the only two screws that are different than the rest.

Insert pry tool in between the two plastic pieces to separate them

Move pry tool back and forth from right to left until the two pieces begin to separate as shown.

Pry the two pieces apart with your hands as shown in the picture to finish separating the pieces.

This completes the disassembly of the main body of the blender so you can continue to perform replacements on the internal parts.