Einleitung

If the thumbsticks on your Nvidia Shield Pro Android TV controller are unresponsive or are behaving irregularly, use this guide to replace them. The tools you will need are a T6 Torx screwdriver and a plastic opening tool. The process is simple, but gently remove the thumbstick you intend to replace as to not damage the plastic.

  1. 2upWrDkkHSuAim2N
    2upWrDkkHSuAim2N
    rEXISDqpGVWuZV3M
    UMZTLXtlRFbZQetZ
    • Remove the six T6 Torx screws from the back of the controller.

  2. kqNxDigpNgUFmIbq
    • Gently pry open the top frame of the cover with a plastic opening tool.

  3. hWrLEB4a6tuLcsas
    hWrLEB4a6tuLcsas
    dfFmUA3LOYAwawct
    • Gently pull the wire connector directly out of its socket, separating the two halves of the controller.

  4. ffpZiB5LMahrkyYL
    ffpZiB5LMahrkyYL
    qF1stmFWc12RxCdn
    • Remove the two T6 Torx screws.

  5. 2FJIdhUCPHVKGsVV
    2FJIdhUCPHVKGsVV
    trIQQg3ZLOmuofyA
    • Remove the guard piece that secures the thumb-sticks to the controller.

    • Apply vertical pressure with two fingers to carefully pop off the thumb-stick(s) in need of repair.

    • Replace it by sliding a new thumb-stick onto the plastic post that secured the old one.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ben Carrasco

Mitglied seit: 23/01/20

327 Reputation

3 Kommentare

Very good instructions that were very helpful. Do you have recommendations on which thumbsticks are the best since the shield seems to have wider and deeper ones? Thanks again for the guide.

Charles Brodie -

Just wondering where would I be able to buy a thumbstick spare part to replace it.

xguyun -

Thanks, very good post, and it could be very useful for me. Just wondering where would I be able to buy a spare part for this thumbstick to replace my broken one.

xguyun -