Oil Drainage

Geschrieben von: Tarun Thiruma
  • Kommentare: 0
Oil Drainage

Schwierigkeitsgrad

Easy

Schritte

2

Zeitaufwand

2 - 5 Minuten

Einleitung

Prereq guide on draining the oil from a Honda EB3000CK2A 3000 Watt Generator in preparation for service.

  1. O2UPsGKAvGAqBR2Y

    • Elevate the generator on a set of stable risers, like wooden blocks.

    • Place a drain pan underneath the generator, between the blocks.

  2. TluShevmNJlwfyQc
    TluShevmNJlwfyQc
    tVvBJDkXZVjUrYUY
    RuWrLMyLEAALIjTI

    • Use a 12 mm socket to remove the oil drain plugs from either side of the generator.

    • Give the oil a few minutes to drain from the cylinder and crankcase housing.

    • Tip the generator back and forth towards either drain hole to allow any last bits of oil to drain.

    • Once the oil is finished draining, replace the drain plugs.

    • Tighten the drain plugs to 13 ft-lb (18 N-m) of torque.

    • During reassembly, be sure to refill the engine oil:

    • Use up to 0.58 liters of SAE 10W-30 oil, until the dipstick is almost completely submerged.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Tarun Thiruma

Mitglied seit: 20/11/19

32532 Reputation

0 Kommentare