One Education Infinity:One Back Case Prerequisite

Geschrieben von: Taylor Bratsch
  • Kommentare: 0
One Education Infinity:One Back Case Prerequisite

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

5 - 10 Minuten

Einleitung

This guide will show you how to remove the back case of the One Education Infinity:One laptop. This should be used to replace a damaged back cover, or to gain access to internal components for more complex repairs.

  1. DFZJjJM1ocjDvQZJ
    DFZJjJM1ocjDvQZJ
    4HiAKnxrUndYjGBh

    • Use a spudger to pry the four rubber pads away from the bottom of the case.

    • Use a Phillips #00 screwdriver to unscrew the four 6.4 mm screws.

  2. nlYAL4fHOFKP4MiM
    nlYAL4fHOFKP4MiM
    hZvExlYrUEyG2bEW

    • Insert a Jimmy or other prying tool into the seam on the edge of the casing.

    • Trace along the edges of the device until all clips are released.

    • Lift the back case away from the device.

  3. 3yDWePtDZf3kWGeB

    • Use a Phillips #00 screwdriver to unscrew the four 6.4mm screws on the hinge mounts.

  4. GgwVPnDTD61dCvV2
    GgwVPnDTD61dCvV2
    GetRSJPVJiiQZhCs

    • Use tweezers to lift the fabric cover and hinge connector away from the daughterboard.

    • Always use ESD safe tools when working with delicate electrical components.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Taylor Bratsch

Mitglied seit: 06/09/16

5504 Reputation

0 Kommentare