Einleitung

In the One Education Infinity:One laptop, the front and rear facing cameras are one component. If you are experiencing performance issues with either camera this guide will help you replace them.

  1. kLKwDj2aHVagP5Mg
    kLKwDj2aHVagP5Mg
    33FbsZ1kP56Uhl43
    • Use a spudger to disconnect the black bundled cable connector from the motherboard.

  2. kOi3RhLhuLBFkGoV
    kOi3RhLhuLBFkGoV
    AJludX4VhiOctykA
    SVLNiUhhv5KfEyDB
    • Use a spudger to lift the black tab on top of the ZIF connector.

    • Slide the ribbon cable out of the connector.

  3. 6TMAWcUXDS3hbJNe
    6TMAWcUXDS3hbJNe
    V6DXuayK2kH1ZVt2
    mIXPEPIdhpgEmltj
    • Use a spudger to flip up the black retaining flap on the ZIF connector.

    • Pull the folded ribbon cable straight out of the connector.

    • This ribbon cable must be disconnected before removing the battery because it is attached to the battery with adhesive.

  4. HHywNc2uwuE1KqUN
    • Use a spudger to pry the battery away from the device.

    • Always use ESD safe tools when working with delicate electrical components.

  5. AvOeJBxy3SADAVxM
    AvOeJBxy3SADAVxM
    hxIs4VDeTOfoUu1S
    Hw6HQKYrPjlNbQ1Y
    • Use a spudger to flip up the black flap on the camera's ZIF connector.

    • Pull the ribbon cable straight out of the connector.

  6. 6THTlnH2Y66ZBtFM
    6THTlnH2Y66ZBtFM
    HhM1MRPGJgIUDyDB
    • Use tweezers to remove the black cushion surrounding the camera lens.

  7. rodkBWXbMNGlIV1t
    rodkBWXbMNGlIV1t
    OCJDxyfCOyLQ3VmF
    • Use tweezers to lift the camera assembly away from the device.

    • Lift straight up to avoid tearing the delicate ribbon cable on the retaining wall.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Taylor Bratsch

Mitglied seit: 06/09/16

5504 Reputation

0 Kommentare