One Education Infinity:One Daughterboard Replacement

Geschrieben von: Taylor Bratsch
  • Kommentare: 0
One Education Infinity:One Daughterboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

10 - 20 Minuten

Einleitung

Follow this guide to replace the daughterboard in the One Education Infinity:One laptop.

  1. DFZJjJM1ocjDvQZJ
    DFZJjJM1ocjDvQZJ
    4HiAKnxrUndYjGBh

    • Use a spudger to pry the four rubber pads away from the bottom of the case.

    • Use a Phillips #00 screwdriver to unscrew the four 6.4 mm screws.

  2. nlYAL4fHOFKP4MiM
    nlYAL4fHOFKP4MiM
    hZvExlYrUEyG2bEW

    • Insert a Jimmy or other prying tool into the seam on the edge of the casing.

    • Trace along the edges of the device until all clips are released.

    • Lift the back case away from the device.

  3. 3yDWePtDZf3kWGeB

    • Use a Phillips #00 screwdriver to unscrew the four 6.4mm screws on the hinge mounts.

  4. GgwVPnDTD61dCvV2
    GgwVPnDTD61dCvV2
    GetRSJPVJiiQZhCs

    • Use tweezers to lift the fabric cover and hinge connector away from the daughterboard.

    • Always use ESD safe tools when working with delicate electrical components.

  5. qCNUWhIhX1DYqA6y
    qCNUWhIhX1DYqA6y
    QGyAXpJErXEACXhV

    • Flip up the black retaining flap on the ZIF connector holding the large grey ribbon cable in place.

    • Pull the ribbon cable straight out of the ZIF connector.

  6. iJmDDBurHELuXHLJ
    iJmDDBurHELuXHLJ
    WKDPSEbAOct1bujg

    • Use the flat end of a spudger to flip up the black tab on the smaller ZIF connector.

    • Use tweezers to pull the ribbon cable straight out of the connector.

  7. 4ZQb3LoRHaaQXLWa
    4ZQb3LoRHaaQXLWa
    jbgZUrFUde6DvJNd
    kpHwlKvjyKa4UuEh

    • Use a Phillips #000 screwdriver to unscrew the three 3.4mm screws.

    • Lift the daughterboard away from the device to remove.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Taylor Bratsch

Mitglied seit: 06/09/16

5504 Reputation

0 Kommentare