Einleitung

This guide will detail how to replace the keyboard in the One Education Infinity:One laptop.

  1. DFZJjJM1ocjDvQZJ
    DFZJjJM1ocjDvQZJ
    4HiAKnxrUndYjGBh
    • Use a spudger to pry the four rubber pads away from the bottom of the case.

    • Use a Phillips #00 screwdriver to unscrew the four 6.4 mm screws.

  2. nlYAL4fHOFKP4MiM
    nlYAL4fHOFKP4MiM
    hZvExlYrUEyG2bEW
    • Insert a Jimmy or other prying tool into the seam on the edge of the casing.

    • Trace along the edges of the device until all clips are released.

    • Lift the back case away from the device.

  3. 3yDWePtDZf3kWGeB
    • Use a Phillips #00 screwdriver to unscrew the four 6.4mm screws on the hinge mounts.

  4. GgwVPnDTD61dCvV2
    GgwVPnDTD61dCvV2
    GetRSJPVJiiQZhCs
    • Use tweezers to lift the fabric cover and hinge connector away from the daughterboard.

    • Always use ESD safe tools when working with delicate electrical components.

  5. qCNUWhIhX1DYqA6y
    qCNUWhIhX1DYqA6y
    QGyAXpJErXEACXhV
    • Flip up the black retaining flap on the ZIF connector holding the large grey ribbon cable in place.

    • Pull the ribbon cable straight out of the ZIF connector.

  6. iJmDDBurHELuXHLJ
    iJmDDBurHELuXHLJ
    WKDPSEbAOct1bujg
    • Use the flat end of a spudger to flip up the black tab on the smaller ZIF connector.

    • Use tweezers to pull the ribbon cable straight out of the connector.

  7. 4ZQb3LoRHaaQXLWa
    4ZQb3LoRHaaQXLWa
    jbgZUrFUde6DvJNd
    kpHwlKvjyKa4UuEh
    • Use a Phillips #000 screwdriver to unscrew the three 3.4mm screws.

    • Lift the daughterboard away from the device to remove.

  8. n32iFiF32M3CSy1x
    n32iFiF32M3CSy1x
    V3MiKjKkIBYHFDw2
    • Use a spudger to lift up the black retaining flap on the touchpad's ZIF connector.

    • Pull the ribbon cable straight back to remove.

  9. lFI53ZG2FiyoVEGc
    • Use a Phillips #00 screwdriver to unscrew the four 6.4mm screws holding the touchpad in place.

  10. iMk2flR2ewjhxw5s
    iMk2flR2ewjhxw5s
    qGZurGkSmE5XLWha
    • Feed the ribbon cable through the hole in the metal frame.

    • Left the metal frame away from the device.

  11. OtqLl12pPD5RbLNM
    • Lift one end of the keyboard up to peel it away from the case.

    • Don't be alarmed if you hear cracking sounds as you pry the keyboard away from the frame. There are dozens of plastic rivets holding the keyboard to the plastic frame.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Taylor Bratsch

Mitglied seit: 06/09/16

5504 Reputation

0 Kommentare