OontZ Angle 3 Back Case Replacement

Geschrieben von: Mason Hollander

Kommentare: 4

Schwierigkeitsgrad

Easy

Schritte

Zeitaufwand

Keine Schätzung

Einleitung

Oontz Angle 3 is a wireless Bluetooth speaker manufactured by Cambridge SoundWorks. It's main features are compact size, along with rubber casing, which makes it dustproof, sandproof and splashproof. Its normal output power is 10 Watts. The battery capacity is 2200 mAh, which helps this speaker work for at least 7 hours with one full charge.

Werkzeuge

Schritt 1

Make sure that the OontZ Angle 3 is powered off before starting the disassembly.
Use the plastic opening tool to remove the rubber caps from each end of the speaker.

Where do I buy the OontZ Angle 3 Motherboard?

David Dy - 05/05/20

Schritt 2

Remove four (4) 11.7 mm Phillips #0 screws from each side at the bottom of the speaker.

Schritt 3

Use the plastic opening tool on one of the corners to separate the bottom piece from the speaker, and then remove the piece.

I bought this 6 months ago, it works pluged into power source, but once unpluged will not work. Even being left on charger over night.

Also i pluged it in the red light is on but glows dim then bright. Is this normal?

I bought it off Amazon brand new

smlboehm - 18/08/18

I cannot believe I am unable to find one video to show how to properly open up the speaker to fix the female port.

I WAS VERY HAPPY with my speakers untill the ports malfunctioned a year after purchased. No warranty and NO illustrations ABOUT opening the housing without damages using PLASTIC TOOLS AS RECOMMENDED .

So now I have great speakers that are now disposable since I cannot open the %#*@ housing.

Great product until it is charged ONE too many times.

josephfcoco - 15/12/19

Cant replace drivers if you cant buy replacement drivers!

Andrew Hardy - 11/01/20