Oregon Scientific Meep! X2 Microphone Replacement

Geschrieben von: J'mel Henneman
  • Kommentare: 0
Oregon Scientific Meep! X2 Microphone Replacement

Schwierigkeitsgrad

Difficult

Schritte

5

Zeitaufwand

15 Minuten

Einleitung

Use this guide to replace a faulty microphone unit in your Oregon Scientific Meep! X2 tablet.

  1. YLWlCTuGRDDQPWWN

    • Remove the orange covers from the left and right sides of the device by sliding up against the tabs.

  2. EKTkeNRLYujVD2lH
    EKTkeNRLYujVD2lH
    UNTb4RTP6ibquJ1q
    OINbQV1bQRDHKaBt

    • You can remove the rear casing by unscrewing all six phillips #00(3.5mm x 4.5mm)screws from the left and right side of the device.

  3. xspdyCQPa2kikpSH
    xspdyCQPa2kikpSH
    t6PXiSJbibeAiCfR
    TJZTOaOhPP4uv2iy

    • Use the plastic opening tools to undo the clips around the edges of the device.

  4. Y5uKfGJAZKKupSAs
    Y5uKfGJAZKKupSAs
    HUfnJ3b4eIH1dXWC

    • Use your tweezers to gently remove the microphone from the slot in the casing.

  5. ArvGsFYws6ScdAom
    ArvGsFYws6ScdAom
    SHGwuu6e1pRk6Ryc

    • Unsolder the microphone unit from the motherboard using the soldering station.

    • In the case of screen or screen sensor replacement, disregard desoldering steps.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

J'mel Henneman

Mitglied seit: 20/01/15

864 Reputation

0 Kommentare