Oregon Scientific Meep! X2 Power Button Replacement

Geschrieben von: J'mel Henneman
  • Kommentare: 0
Oregon Scientific Meep! X2 Power Button Replacement

Schwierigkeitsgrad

Difficult

Schritte

5

Zeitaufwand

15 Minuten

Einleitung

Use this guide to replace a jammed or broken power button in the Oregon Scientific Meep! X2 tablet.

  1. YLWlCTuGRDDQPWWN

    • Remove the orange covers from the left and right sides of the device by sliding up against the tabs.

  2. EKTkeNRLYujVD2lH
    EKTkeNRLYujVD2lH
    UNTb4RTP6ibquJ1q
    OINbQV1bQRDHKaBt

    • You can remove the rear casing by unscrewing all six phillips #00(3.5mm x 4.5mm)screws from the left and right side of the device.

  3. xspdyCQPa2kikpSH
    xspdyCQPa2kikpSH
    t6PXiSJbibeAiCfR
    TJZTOaOhPP4uv2iy

    • Use the plastic opening tools to undo the clips around the edges of the device.

  4. hBfNHkOLB6HJpJ1e
    hBfNHkOLB6HJpJ1e
    GLFZDqgytZVDRrjL

    • Use a tweezer to gently pull the power button sensor out of the case's slot.

  5. dd1MGYc5Ol4F1JyZ
    dd1MGYc5Ol4F1JyZ
    jALrbpJ1dRBkxNXO

    • Use the soldering station to unsolder and remove the power button from the motherboard.

    • In the case of screen or screen sensor replacement, disregard desoldering steps.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

J'mel Henneman

Mitglied seit: 20/01/15

864 Reputation

0 Kommentare