Palm Treo 600 Front Case Replacement

Geschrieben von: Michael Polka
  • Kommentare: 0
Palm Treo 600 Front Case Replacement

Schwierigkeitsgrad

Moderate

Schritte

4

Zeitaufwand

2 Minuten

Einleitung

After you have taken off the back case, the front case can also be removed to help you complete other teardown guides.

  1. obnTCBVjIWtTQTIZ

    • On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.

  2. YAem6KvW6JpdEyP3
    YAem6KvW6JpdEyP3
    AloIJ1q3GPojNAxU

    • Use the T6 Torx Screwdriver to remove all 4 screws.

    • You have to first remove the Stylus to access the 4th screw.

  3. VIXJeTyoDDosj5KB
    VIXJeTyoDDosj5KB
    UFI6ndJ5KKRBCNdA

    • Using a plastic opening tool, carefully separate the front and back cases.

    • Note: The antenna will detach from the phone.

  4. BRBBQuNaJHTBdIUs
    BRBBQuNaJHTBdIUs
    ekCmuEAXoIMQgCXw

    • Using a T6 Torx Screwdriver, remove the two screws.

    • The motherboard will now be loose from the front case.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Michael Polka

Mitglied seit: 28/01/10

22 Reputation

0 Kommentare