Palm m105 Batteries Replacement

Geschrieben von: Erik Thompson
  • Kommentare: 1
Palm m105 Batteries Replacement

Schwierigkeitsgrad

Very easy

Schritte

3

Zeitaufwand

25 Sekunden

Einleitung

You will need to have a supply of AAA batteries for replacement. Can be found at most hardware and department stores. You can also order them online here

  1. SeiJyqFCwb23WiDa

    • Press the latch on the battery door on the back of the device and pull outwards.

    • Back the device up if possible, you may lose all your data if there is no power for a little too long for it to retain it, make sure this is done quickly.

  2. EyHdtPHgyVc5BqUW

    • Install two AAA alkaline batteries into the battery compartment, placing the positive and negative ends of the battery in the correct positions. (Shown as a diagram inside the battery compartment)

    • Make sure to remove one battery at a time and replace with fresh battery. This will retain information on the device.

  3. uCnsEaxQYMpdZYCJ

    • Place the battery door back into place on the back of the device; it will make a 'click' sound when properly reattached.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Erik Thompson

Mitglied seit: 04/10/11

31 Reputation

Ein Kommentar

"Moderate difficulty"?? There's only three steps and two of them involve removing and reinstalling the battery door.

Gene Merritt -