Palm m500 Motherboard Replacement

Geschrieben von: Miles Johnson
  • Kommentare: 0
Palm m500 Motherboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

Keine Schätzung

Einleitung

Before you begin disassembly, be sure to have the necessary tools. You will need a Torx size T6 screwdriver, tweezers, and the device opening tool. You will be removing the stylus, the back panel, and the battery in order to access the motherboard.

  1. NOoTe6QEfLDMsiEG

    • Remove the stylus from the side of the PDA by sliding it upwards.

  2. NmWQtiF3WEqDNQQT
    NmWQtiF3WEqDNQQT
    yGGPWGAXeVtQ5MZC

    • Remove the 4 screws from the corners of the back panel of the device using a size T6 Torx screwdriver.

    • Place screws in a plastic bag or another safe place.

  3. gOUyoAiZPnwbdPRR
    gOUyoAiZPnwbdPRR
    SNivEK2hGyByIi4L
    n2fluULSFB2XeJkM

    • Insert the edge of the plastic opening tool between the back panel and the black stylus holder.

    • Carefully and forcefully pry the panels apart.

  4. hm5ywENuUPe6EvQX
    hm5ywENuUPe6EvQX
    LX6VTVEmRnIw1NgQ
    oYRxLwV4hANr5Xa3

    • Use tweezers to unplug the battery cable from the motherboard socket.

    • Gently remove the battery from the motherboard using your thumb and forefinger to pull upwards.

    • The battery may be difficult to remove because of light adhesive on the back. It may require some force to pry the battery away from the motherboard with your fingers.

  5. pNQMgmRcNiviYhLM
    pNQMgmRcNiviYhLM
    H1ttyHIflkSLGjsQ
    TKHLw2vZXMNRy6LM

    • Use the plastic opening tool to pry the orange clamp away from the motherboard.

    • Use the plastic opening tool at the bottom of the device to pry the motherboard away from the front plate.

    • Gently and forcefully lift the motherboard away from the front plate by using your thumb and forefinger.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Miles Johnson

Mitglied seit: 12/01/11

579 Reputation

0 Kommentare