Palm v Outer Case Replacement

Geschrieben von: Anthony Platt
  • Kommentare: 1
Palm v Outer Case Replacement

Schwierigkeitsgrad

Difficult

Schritte

5

Zeitaufwand

10 - 15 Minuten

Einleitung

How remove the outer casing

  1. ndMLaaHKJFnPULeL

    • Lay device face down on surface.

  2. SDPXtJCWtroGN4BY
    SDPXtJCWtroGN4BY
    UauUf3OqXEAa4VxB

    • Heat the left and top edges with hairdryer for one minute.

    • Move hairdryer back and forth to evenly heat up surface.

    • Caution: directly heating the screen can melt or distort the screen.

  3. 4kriJZYCYuXlG3IC

    • Use tweezers to hold Palm right side down on it's side.

    • Use a plastic opening tool to pry open front and back casing.

    • If you are unable to open you may need to heat with hairdryer for longer.

    • Be sure not to touch case directly with fingers, it will be hot!

  4. LHhWlE5x3hJRLoIR

    • Leave plastic opening tools in between front and back casing.

    • Rotate Palm and repeat steps 2 and 3 for right and back edges.

  5. dDAbHIxBprCxd3Ca
    dDAbHIxBprCxd3Ca
    v5ENlVPjTANDk1S3
    qMrwVW6nTxaywIIn

    • Now pry open front and back casing with plastic opening tools.

    • Separate front and back casing completely.

    • Power button will fall off once front and back casing have been removed. Be sure not to lose it.

Tinte & Feder

Anthony Platt

Mitglied seit: 09/02/10

66 Reputation

Ein Kommentar

So...This given by my grandmother and it is out of battery. Unluckily, it won't charge, because the %#*@ old battery had gone kaput. I had a hard time finding one that might be suitable, and turnout that I need to insert it into the device and connect it to the circuit board. I have some solid soldering skills, but without a heat gun, the andonized cover won't come off. And what's more, I jammed a pencil tip into the "reset" hole when trying to reset the device. Thinking the big opening was a kind of cover-releasing button...I was just having a whole lot of trouble and thinking too much. !&&*.

Xavier Jiang -