Einleitung
This guide demonstrates how to remove the case of the Panasonic KX-E603 in order to access internal components. You will need a Phillips #2 Screwdriver. This process also involves removing the roller wheel.
Werkzeuge
-
-
Remove the three 19 mm screws located in the recessed holes on the edge of the black underside panel using a Phillips #2 screwdriver.
-
-
-
Flip the typewriter back to its original orientation, then rotate it so that the rear is facing towards you.
-
Remove the three 19 mm screws near the bottom of the tan body panel using a Phillips #2 screwdriver.
-
-
-
Open the typewriter lid and push the carriage away to expose the two screws holding the case to the chassis.
-
Remove the two 19 mm screws using a Phillips #2 screwdriver.
-
-
-
Unlock the roller wheel by simultaneously pressing down on the two spring levers on the left and right of the roller ends.
-
-
-
While both spring levers are depressed, lift up with both hands to remove the roller wheel.
-
-
-
Flip the top down. Then, with both hands, lift straight up on the tan case to remove it from the chassis.
-
To reassemble your device, follow these instructions in reverse order.
