Einleitung
If you will be working on your Skycontroller 2, it is imperative that you remove the battery at the start. Also, if your Skycontroller 2 is not powering on or holding a charge, it is necessary to replace the battery. To replace the battery, use this guide.
Before beginning, make sure to power off your device completely and disconnect from any external power source.
Werkzeuge
-
-
Insert the plastic opening tool into the top of the cover and pry upwards to lift the battery cover.
-
Remove the cover by pulling up and out.
-
-
-
Pull the connectors out by gently pushing the tabs and pulling up on the connector.
-
Disconnect the battery from the remote by pressing the white tab and pulling the connectors apart.
-
To reassemble your device, follow these instructions in reverse order.
