Penny Board Trucks Replacement

Geschrieben von: Eduardo Ron
  • Kommentare: 0
Penny Board Trucks Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

15 Minuten

Einleitung

The trucks on a Penny board are an essential part of the board. They can get damaged in a variety of ways, which can lead to an unpleasant riding experience. Whether they get worn down or completely broken, they will need a replacement. Luckily, this repair is pretty simple so one can get back to skating in no time. For this repair, a skate tool will be required.

Werkzeuge

  1. 6xOSdWTFJIhmOpmc
    6xOSdWTFJIhmOpmc
    1XfrMMpmgWHFxXGU

    • Use a skate tool to loosen the bolt in the wheel with an appropriately sized socket.

    • A skate tool will come with all the tools necessary to do this replacement from start to finish.

  2. J5cwKJiZjiqShRaV
    J5cwKJiZjiqShRaV
    tVLutrurRsNKVeHt

    • Remove the wheel by lifting it from the truck.

    • Repeat this step for the other wheel.

  3. DYPGVeJJXAqSaT1Q
    DYPGVeJJXAqSaT1Q
    tijBWTXEhK4ZDQlA

    • After completing the removal of both wheels, your board will look like this.

    • Place the skate tool over the bolt on the truck.

    • Maintain a good grip on the tool and use the Phillips screwdriver to loosen the nuts.

    • Repeat this step for all four screws.

  4. NpXmhMyQGLDTGpFJ
    NpXmhMyQGLDTGpFJ
    UwHqcp1ZtlreJeL3

    • Lift the truck to remove it.

  5. 1asjkDw5jJyS1PmB
    1asjkDw5jJyS1PmB
    ffhkZTo1q3RyvXFl

    • Remove the screws from the board by pulling them out with your hands.

    • Use the Phillips screwdriver to loosen them more, if necessary.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Eduardo Ron

Mitglied seit: 17/02/21

171 Reputation

0 Kommentare