Pentax Optio S4i Front and Back Cover Replacement

Geschrieben von: Nicole Wong
  • Kommentare: 0
Pentax Optio S4i Front and Back Cover Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

7 Minuten

Einleitung

This guide will teach you how to properly remove the cover of the camera.

  1. ZgmSVK6peCUBf5g4
    ZgmSVK6peCUBf5g4
    5DZJGlOkKtKhZxmg

    • Remove the following screws:

    • Two silver 3.15mm Phillips #00 screws on the right side of the camera

    • Two silver 2.08mm Phillips #00 screws on the left side of the camera

  2. Ti2MvaIh4iSGDH3s

    • Remove the two indicated screws on the bottom of the camera:

    • The screw circled in red is a longer silver 3.15mm Phillips #00 screw

    • The screw circled in blue is a shorter silver 2.25mm Phillips #00 screw

  3. rKw34AmCEhmfFhgE
    rKw34AmCEhmfFhgE
    vDRrY3eqsohAgLjH

    • Carefully pull the back of casing away from the front.

  4. TGBSGe6PpZ11OVdL
    TGBSGe6PpZ11OVdL
    iOSWVovFCHRbIs6T
    ElILR2jSQVCxaeAx

    • After removing the back cover, several things must be removed.

    • Silver donut-shaped button will fall off. Place separately. Remove the plug covers on the right side of camera, labeled “PC/AV” and “DC IN 4.5V”.

  5. MTriUeWyE6Up5xBj
    MTriUeWyE6Up5xBj
    2p3RoehZlahhOBFn

    • To remove the front cover, gently hold the inside structure of the camera and slowly pull the front cover off.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Nicole Wong

Mitglied seit: 30/01/11

329 Reputation

0 Kommentare