Einleitung
The speakers are the two circular objects inside the device. This guide will detail the steps in how to replace a damaged speaker.
Werkzeuge
Ersatzteile
- 
                  
                  - 
            Unscrew the nine exterior screws on the back panel using a PH0-size Philips-head screwdriver. 
- 
            NOTE: A larger screwdriver head and more force may be required for damaged screws. 
- 
            Remove the triangular end piece by pulling it straight off. 
 
- 
            
- 
                  
                  - 
            Remove the colored grill by sliding it off in the direction of the removed end piece. 
- 
            Pry off the back battery panel with the plastic opening tool. 
- 
            NOTE: Be careful to avoid tearing any wires. 
 
- 
            
- 
                  
                  - 
            Remove the circuit board by unscrewing the two interior screws located on the circuit board. 
- 
            Pull out the battery plugs from the circuit board by pulling out the plugs to fully remove the back panel from the rest of the speaker. 
 
- 
            
- 
                  
                  - 
            Locate the speaker needing replacing. 
- 
            Remove the one screw holding the speaker in place with a PH0 size philips head screw driver. 
 
- 
            
- 
                  
                  - 
            Score the glue that is holding the speaker in place with the spudger, and use your hands to pry off the speaker. 
 
- 
            
- 
                  
                  - 
            Using a non-conductive glue, carefully seal the speaker to the casing. 
- 
            Follow the glue instructions as set by the manufacturers. Let the glue set the appropriate amount of time. 
- 
            Reassemble the device 
 
- 
            
To reassemble your device, follow these instructions in reverse order.