Pillow Stuffing Replacement

Geschrieben von: Kylee Harman
  • Kommentare: 0
Pillow Stuffing Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

20 - 25 Minuten

Einleitung

Pillows quickly wear out and can start to smell, and replacing them can get very expensive. One inexpensive and quick way to bring the life back to your pillow is to simply replace the stuffing. Pillow stuffing can be found at local craft stores, and even at some mass retailers like Walmart. This guide explains the process of replacing the stuffing of a pillow that does not have a zipper, explaining the process of opening up the pillow without damaging the fabric, and providing simple instructions on restitching the seam.

  1. 2NZsWcbHWP1cZh1M

    • Measure the length and width of the pillow to determine how much stuffing is needed.

    • A standard sleeping pillow is 20"x26", and will require 2 lbs of polyester fiber fill.

  2. MvbJrYtyaCUixj5P

    • With the seam ripper, create a 4-6 inch opening in the pillow about 2 inches from the corner.

    • To use the seam ripper: cut one stitch at a time using the sharp end. The red tip should remain upwards.

  3. pE4MdYIalZBH5ZVN
    pE4MdYIalZBH5ZVN
    1eJKPoDygetSHMvJ

    • Remove the existing stuffing from the pillow.

  4. JTVE46Jeimd3OWRR
    JTVE46Jeimd3OWRR
    KKTjrawHRwQHyERO
    tVDak5dAsC4x5gfT

    • Place a tennis ball-sized amount of new stuffing firmly into the 3 intact corners of the pillow.

    • This will help open up and stabilize the shell of the pillow to ensure even distribution of the stuffing.

    • Continue adding stuffing to the pillow to desired stiffness.

    • To ensure a smooth and regular shaped pillow, gently pull at the stuffing until it is fluffy before placing it into the pillow.

  5. eUsjBLoW62BL1I1x
    eUsjBLoW62BL1I1x
    2QniVNtpMhCr2uEV

    • Use the scissors to cut a length of thread approximately 24 inches long.

    • A dark thread is used here to maximize visibility. Typically, the thread would be matched with the color of the fabric.

    • Thread the needle and slide it to the center of the length of thread.

    • Triple knot the two loose ends together.

  6. GqZLNEHtJDRkmXJL
    GqZLNEHtJDRkmXJL
    eDbFm1YTDNKitTAj
    s6EpHxQpX6aPnvQm

    • Start a ladder stitch from the inside of the pillow by pulling the thread through the folded seam, right behind the opening that you created.

    • Make a small stitch through side of the opening.

    • Make an identical stitch directly across from your first stitch, on the opposite side of the opening. Pull the thread taut to begin the new seam.

    • Repeat, alternating from one side to the other until you have reached the end of the opening.

    • Be sure to keep each new stitch on the folds of the original seam.

  7. 6ZXCMoqSI1JKmdEL
    6ZXCMoqSI1JKmdEL
    csAlgMTQkdOexury

    • To compete the ladder stitch and close the pillow, pierce the needle through both sides of the seam and slowly pull the thread through until a loop is created.

    • Feed the needle through the loop and pull the thread tight.

    • Repeat this once more to ensure that the pillow is closed tightly, and cut off any excess thread with the scissors.

Tinte & Feder

Kylee Harman

Mitglied seit: 29/01/18

195 Reputation

0 Kommentare