Planet Eclipse Etha Bolt O-rings Replacement

Geschrieben von: nicholasj6
  • Kommentare: 0
Planet Eclipse Etha Bolt O-rings Replacement

Schwierigkeitsgrad

Easy

Schritte

7

Zeitaufwand

15 - 30 Minuten

Einleitung

Sometimes, the O-ring seals in the Etha's bolt can get worn out and need to be replaced. Fortunately, Planet Eclipse designed this part of the marker to be taken apart and put back together with ease.

  1. PmAtpyteCXImDbXc
    PmAtpyteCXImDbXc
    hH3rMIawLJyWVHMP
    u6chJC2MZ5AOQmSG

    • Using the 1/4" hex key, turn the bolt counterclockwise and remove.

  2. NDZX44DwlIJCFWvy
    NDZX44DwlIJCFWvy
    jqpAt1jWDAtZHTLc

    • Slide the bolt tip and spring off of the main assembly.

    • Keep a towel handy, you may get some grease on your hands.

  3. nYXYYGLuR4REhbEZ
    nYXYYGLuR4REhbEZ
    6mAC5nGIiGmeOqUl
    4PbJ4ZmO3f15EsIN

    • Unscrew the casing from the rest of the bolt.

    • Again, you may get some grease on your hands during this step.

  4. fHKTKv5eNQiBbaFQ
    fHKTKv5eNQiBbaFQ
    V6VlmbxUlDgJbAuQ
    SuQ5UabdWUPsHSUC

    • Grab the flat surface shown.

    • Unscrew this portion counter clockwise to remove it.

    • If you're having trouble unscrewing the part, try using a small wrench.

  5. 1XkncEUng3SNPcVg
    1XkncEUng3SNPcVg
    eCDWe31hRKKUEQlc

    • Grab the threaded cover and slide it away from the spring.

    • The bolt should now be in three pieces.

    • The threaded cover is the same part that you unscrewed in the last step.

  6. oJxkxJIIEcTScmtv
    oJxkxJIIEcTScmtv
    SaunapTutBbEIGJS
    Dw2OR4LT4GYgFChX

    • Replace and lubricate the 9 marked O-rings.

    • O-ring removal will be explained in the next step.

  7. WZhqbEGoAIvfGHEf
    WZhqbEGoAIvfGHEf
    RCSPm41IO652353k
    6MamaqxhDOrTkvW4

    • Grab the O-ring on the sides.

    • Pinch the O-ring upwards to create a gap between the metal and the ring.

    • Use a small object to slip into the loop and pull the O-ring off gently.

    • We recommend using a small Allen Key for this.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

nicholasj6

Mitglied seit: 14/10/14

261 Reputation

0 Kommentare