PlayStation Move Case Replacement

Geschrieben von: Sarah Shand
  • Kommentare: 0
PlayStation Move Case Replacement

Schwierigkeitsgrad

Moderate

Schritte

11

Zeitaufwand

10 - 15 Minuten

Einleitung

This is a prerequisite guide that will show you how to disassemble the PlayStation Move controller.

  1. rTNPCfOojOq4OT3n
    rTNPCfOojOq4OT3n
    uAyyLMgYHpRB1h5c

    • Turn the controller over and unscrew the four 10mm screws with a PH #00 screwdriver.

  2. GfCOpyX2hHLC3IyX
    GfCOpyX2hHLC3IyX
    GkLVd3KATTueJNFE
    SDVUgveGGBtD14DG

    • Pinch the sides of the back panel to remove it and set it aside.

  3. U3JMHsKmcpQbhoZJ
    U3JMHsKmcpQbhoZJ
    56YmQPxYEbPmTCH4

    • Hold the base of the controller with one hand and with the other carefully pull up on the white spherical piece to remove it.

  4. oBngX1BhFqDokAVy
    oBngX1BhFqDokAVy
    CYAqYSOWr3OYq4GN

    • Push the Lithium Ion battery from its slot to remove it.

    • Be mindful not to damage the wires or wired components, as the battery will still be attached via its connector.

  5. MxVPpGeDH2SmlQJ5

    • Unscrew the 9mm screw in the battery slot with a PH #00 screwdriver.

  6. oMPLRtD2ILqasspc
    oMPLRtD2ILqasspc
    msG4WUqyfNGJma1M

    • Using a plastic opening tool, carefully pry the rumble motor free.

  7. pxWQtDQswulJYkAR

    • Unscrew the 9mm screw behind the rumble motor slot with a PH #00 screwdriver.

  8. DDBBfApHSq1J1tLH
    DDBBfApHSq1J1tLH
    Uqsa2NJImaAJDMER
    6ArX4dDRSvVAZarC

    • Carefully pinch the plastic sides of the battery slot and lift it (along with the circuit board) from the plastic shell of the move controller.

  9. aohCIvggqmiJMkZp
    aohCIvggqmiJMkZp
    1rdnGbBiA1TRBM1Y

    • Using your fingers, carefully pry the square green piece beneath the battery slot free.

    • It is attached via white ribbons which need to be kept intact.

  10. JksyrjOpYatV2P24
    JksyrjOpYatV2P24
    1RtEK5DTVBCQM2Zy
    air3JAXKwjUeafjA

    • Follow the white ribbon attached to the part you just removed to a smaller, more rectangular piece.

    • Lift the rectangular piece from its slot to free it.

  11. C1tJWtvG6PNdJ63A
    C1tJWtvG6PNdJ63A
    mc3nvGsgql2vDjlW
    UfbuSMevPXFDkpit

    • Carefully lift the entire circuit board from the black plastic encasing it.

    • Take extra care not to damage any of the wired components.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Sarah Shand

Mitglied seit: 20/02/17

1804 Reputation

0 Kommentare