Dexter 220W Wired Multifunction Sander - 220MFS2.5 Stabiliser Replacement

Remove the seal on the back of the device.

Unscrew the first screw from the pad.

Then unscrew the remaining four screws and pull up to remove it.

Finally, remove the screws located on the shell of the device.

To remove the stabilisers you must leverage with a screwdriver.

To reset the new stabiliser, you just have to reposition it in your home.

Replace the hull of the sander, taking care to properly position the stabilisers in their housings.

Finally, remove the screws located on the shell of the device.

Replace the pad by positioning it perfectly in the tips.

Screw the four screws

Then the last screw. Finally, put the joint back in its place.