Dexter 330W Wired Vibrating Sander - 330SHS2.5 Carbon Replacement

Remove the dust case and the seal on the back of the device.

Unscrew the six screws from the pad.

Lock the motor with a screwdriver to be able to unscrew the centre screw, you will not be able to get there without blocking the gear.

Using a screwdriver or screwdriver, unscrew and open the device.

Lift the two coals with a screwdriver to get them out of their homes.

Press the tab to disconnect the carbon from the engine

Remove the coals from the coal door.

Then put the new ones inside.

Using a screwdriver, lift the connecter tab before reconnecting it.

Reconnect the carbon and check that they hold well.

Put the two coals back in their homes.

Replace the shell, then screw it back on.

Reposition the part, then lock the engine with a screwdriver to screw.

Put the tray back on and screw the screws.

Finally, reposition the vacuum bag.