PowerA Fusion Controller For Xbox One Buttons Replacement

Geschrieben von: Andrea
  • Kommentare: 3
PowerA Fusion Controller For Xbox One Buttons Replacement

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

20 Minuten

Einleitung

The buttons in your controller are the ones that let you move around in the games. Learn how to replace them with this guide.

  1. cmXAtHGTPXBSVxWq
    cmXAtHGTPXBSVxWq
    rXyDNBi1wsOSUoDE
    1nmcuwTFpvrKI1AZ

    • Remove the (9) nine 9.2mm screws with a JIS #1 screwdriver.

    • Remove the two bottom plastic grip covers.

  2. 3hlO1GJLknjQNy3q
    3hlO1GJLknjQNy3q
    ATByquY5VyARSQQC

    • Remove the (2) two 9.2mm screws with a JIS #1 screwdriver.

    • Remove the back cover of the controller.

  3. fpJgUJdARuAhhL4f
    fpJgUJdARuAhhL4f
    hNsTvIsGlgiSjxke
    CCOgIa2PG5fZhViM

    • Remove the (5) five 9.2mm screws with a JIS #1 screwdriver.

    • Lift the motherboard and let it hang.

  4. T2INfABIcgOIY3uL
    T2INfABIcgOIY3uL
    E5yycwmZYupss4oJ

    • Remove the (4) four 9.2mm screws that are holding the motherboard to the controller.

    • Put the motherboard aside.

  5. QuuxnPcMmLIiJCm3
    QuuxnPcMmLIiJCm3
    6OhkKyA2wACZuVV5

    • Remove the buttons.

  6. KS2cPFYhlqoq5b1F
    KS2cPFYhlqoq5b1F
    YIWm1ITt3sdpAlg4

    • Go back to the motherboard, and remove the buttons' gasket with a tweezler.

    What do you do after you remove the button gasket

    AcridAssassin -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Andrea

Mitglied seit: 26/09/17

566 Reputation

2 Kommentare

Okay so what do you do if by any chance one of the links that are sawdered to the mother board for the D Pad Connection cable breaks… Then what? How would I go about fixing that????

Heather Jesse -

is there a guide to clean the bumpers out? my RB became less consistent and i'm hoping it's just because they're gunked up

urmum -