PowerBeats2 Wireless Headphones by Dr. Dre Battery Replacement

Geschrieben von: Faizan Naveed
  • Kommentare: 1
PowerBeats2 Wireless Headphones by Dr. Dre Battery Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

30 Minuten

Einleitung

  1. kShZRfXrVFtJL3et

    • The battery is located inside the right side ear piece.

  2. HSKvsb3rZiZaJZNp

    • Heat the right side gently at 140 F for about 3 minutes.

    • Do not over heat or it will melt the housing.

  3. moCXdCJjstSNtmXU
    moCXdCJjstSNtmXU
    QiPRhyRfLVN2E4by

    • After heating, gently remove the cover/casing as shown in the picture.

    • Take your time and re-heat if cover/casing does not remove smoothly.

  4. OA5FXaWGpYRRiIhm

    • Desolder battery using soldering iron and replace with replacement battery.

    dose not the new battery need to be resoldered . polarity may be something to note.

    william.gleaves -

  5. bHAsZHAap51hqB5p
    bHAsZHAap51hqB5p
    giVvkrjS21kkgHRM

    • After battery is replaced, apply super glue to the border of the inside of the battery cover/casing and put it back in place.

    • Use small clamps/binder clip to hold the housing in place while the super glue dries up.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Faizan Naveed

Mitglied seit: 12/04/17

3227 Reputation

0 Kommentare