Einleitung
This guide will be showing you how to replace the propeller blades on the Slipstream EVO.
Ersatzteile
-
-
Using two fingers, place them on each side of the propellor near the middle.
-
Pull straight up with force. The propellor will feel as if it will not come off but do not be scared to use some muscle.
-
Warning: Pulling at an angle will result in bending the motor's needle.
-
-
-
Checking the underside of the propeller there will be a letter which will correspond with each side of the drone
-
On the corner of the drone where the blade mounts onto the motor you will see which blade you should be using.
-
Warning: Failure to match the propeller blade to the right motor may result in the drone not flying.
-
Lining up the propeller blade with the needle, push down until the propeller is flushed.
-
To reassemble your device, follow these instructions in reverse order.
