Einleitung
This guide will show you how to take off and replace the screen of your Lyra.
Werkzeuge
-
-
Using slight pressure with your finger on the word "OPEN", slide the battery plate down.
-
Remove the battery plate.
-
Place your finger at the bottom of the battery.
-
Lift up on the battery until it pops out from the LYRA X2400.
-
-
-
Remove the two Phillips screws from the silver cover at the top of the Lyra.
-
Slowly wiggle the silver cover while pulling it away from the device.
-
-
-
Remove the two Phillips screws from the bottom of the device, next to the charger port and Compact Flash release button.
-
Pull the silver case from the bottom of the device.
-
-
-
Carefully pry up the screen with a plastic opening tool.
-
Disconnect the screen's ribbon cable from the circuit board.
-
Remove the screen.
-
To reassemble your device, follow these instructions in reverse order.
