Einleitung

  1. xbp6JKh2Oy1CjP1J
    xbp6JKh2Oy1CjP1J
    TZHxquRfwXXJCDmh
    • Using a separating tool, look for a seam in the plastic casing that looks most accessible.

    • Use the prying tool to separate the front and back casing, working your way around the perimeter.

    • Utilize a card tool or a pick to assist in keeping the case separated.

    • To reassemble the device simply align the two casing halves and pinch to snap together or press down on the edges while the device in on a table.

  2. X1aBxoerMAVKZCUY
    • Flip over the back of the device while keeping it close to the front, the speaker is attached to it.

    • Remove the yellow tape securing the speaker to the back casing.

  3. JoBVWAguJJABVRWK
    JoBVWAguJJABVRWK
    xYVLo6lxapHAdFLF
    • Use the separating tool to pry the speaker from its surface.

    • Use caution when removing the speaker, you may damage the screen.

    • Cut or desolder the wires to replace or repair the speaker.

  4. vpphkiCDpOlqdXnE
    vpphkiCDpOlqdXnE
    pCw2JXO5Z3SYkBin
    UelPC6KdXDt4f4Dx
    • Using a P00 Phillips screwdriver, remove the three screws securing the black plastic camera housing and remove it.

    • Peel back the beige tape while holding down the camera ribbon cable to prevent tears

  5. 4FXND3rvawhexEfY
    4FXND3rvawhexEfY
    rYDHyb3VtQIos46K
    • Lift the locking tab that is securing the camera ribbon cable.

    • Slide the ribbon cable out from the connector and remove from casing.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Dayne Russell

Mitglied seit: 27/01/15

401 Reputation

0 Kommentare