Einleitung
First step to repairing RIDGID drill. All it takes is getting the case off...
Werkzeuge
-
-
Remove the backplate.
-
Using a Torx T20 screwdriver, remove the four screws attaching the back plate.
-
-
-
Remove the drill handle.
-
Using the Phillips #2 screwdriver, remove the five screws attaching the drill handle to the body.
-
-
-
Remove the gear casing from the body.
-
Using the Philips #2 screwdriver, remove the four screws attaching the gear casing to the body.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
