Razer Blade RZ09-0102 Battery Replacement

Geschrieben von: Nicole Schukow
  • Kommentare: 5
Razer Blade RZ09-0102 Battery Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

15 Minuten

Einleitung

A guide to remove and replace the battery for the Razer Blade RZ09-0102. You may want to replace your battery if the battery cannot hold a charge or drains after an unreasonably short time. The battery needs to be removed if working on other components as well.

  1. MZyF6AraMilpYiuF

    • Before you begin, be sure to turn off your laptop.

    • Using a Torx T5 screwdriver, remove the ten 1/8 inch screws securing the back cover.

    • Remove the back cover.

    I need the screws is there any way I can get them?

    Lupita Muro -

  2. OHK3NfiyACSJnGLS
    OHK3NfiyACSJnGLS
    v3DrtVW5uMH6oEjJ

    • Remove the seven screws holding the battery in place using a Phillips #0 screwdriver.

  3. RdOAmIaRPxsIk2Lt

    • Unlock the ZIF connectors securing the right ribbon cable.

    • To unlock a ZIF connector, use an opening tool or your fingernail to flip up the small, hinged locking flap.

    • Carefully pull the two ribbon cables out of their sockets.

  4. CGGmwmgKc2kqyMNv

    • Use an opening tool to unlock the ZIF connector securing the white ribbon over the battery.

    You know where I can buy that kind white ribbon, it hard find anywhere.

    loona.ot12 -

  5. BPEFpGKfcRMVwnYt
    BPEFpGKfcRMVwnYt
    6TYXlZxbDDLYdCDn

    • Carefully pull out the two connectors out of their sockets.

    • Pull parallel to the motherboard, not straight up.

  6. XoTcg2TfOHJZfE2Q
    XoTcg2TfOHJZfE2Q
    eSWxLNUH6VJFlWf1

    • Pull the wide battery connector towards the battery to disconnect it from the motherboard.

    • Pull parallel to the motherboard, not straight up.

  7. EDIssWUWWJHMxObn
    EDIssWUWWJHMxObn
    hhFLpKcXkfpNHSKS

    • Remove the battery from the laptop.

    I lost some of the screws! What are the right replacement screws for the back cover and the battery?

    Anon -

Abschluss

To reassemble your device, follow these instructions in reverse order.

For optimal performance, after completing this guide, calibrate your newly installed battery.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Tinte & Feder

Nicole Schukow

Mitglied seit: 04/10/18

462 Reputation

2 Kommentare

Hey Nicole, thank you for writing this fantastic guide. Do you have any recommendations for vendors or websites for this specific battery replacement?

Erfan Moradi -

My dudes, anyone can tell me what model is the RZ09-0102 battery connector and where to order the motherboard side?

A friends laptop got the connector melted *moisture* and I can’t identify this dense 30-pin oedipus.

Giorgi Kikuashvili -