Einleitung

The motherboard is one of the most important components of the Razer Blade Stealth 2016 (Part # RZ09-01682E20). The motherboard has connectors in which the other circuit boards will be slotted. Essentially, all components lead back to the motherboard. If the motherboard fails, then so can almost every other component in your Razer Blade Stealth 2016. This guide will show you how to remove and replace the motherboard.

  1. hdbyoBWNB6HCkOsL
    hdbyoBWNB6HCkOsL
    ahbJNwaE14yqxhoJ
    LlvEjesZiBwLkZgW
    • Use a Torx screwdriver to remove the eight 3 mm screws on the back case.

    • Remove the rear cover by prying up lightly starting in one of the corners.

  2. qosKrZwqGwThRWXx
    qosKrZwqGwThRWXx
    pjeAgo1U6BfVFjZe
    • Use a Phillips screwdriver to remove the six screws securing the battery.

    Phillips* screw heads not T4 Torx based on the photo.

    Sean Christiansen -

    You’re right! Thanks for the catch—I’ll fix that step.

    Arthur Shi -

  3. Qt4xQYIaS6rerRxH
    • Unplug the battery connector from the motherboard.

    • Remove the battery from the device.

  4. fDiXTkNbCDqJJYSk
    • Remove the red and black cables that are attached to the motherboard.

  5. AF513jpC5dmIKUOO
    • Remove the four 3.4 mm screws around the black square using a T4 Torx screwdriver.

    • Remove the heatsink.

  6. p1SNEEDXKZJIZKRa
    • Remove the 3.4 mm screws to the cooling fans using a T4 Torx screwdriver.

    • Remove the cooling fans.

  7. nMDqFBsjb5tqmM4d
    nMDqFBsjb5tqmM4d
    wxR2yBYmeW45KpB2
    WTrgJfTxU45bCXv3
    • Remove the 3.4 mm screws on the perimeter of the motherboard using a T4 Torx screwdriver.

  8. td6AjZXWhvouK3RK
    • Remove the motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

SadieGomez

Mitglied seit: 21/09/21

352 Reputation

0 Kommentare