Razer Phone Battery Replacement

Geschrieben von: Bryan
  • Kommentare: 18
Razer Phone Battery Replacement

Schwierigkeitsgrad

Moderate

Schritte

10

Zeitaufwand

25 Minuten

Einleitung

Is your Razer Phone having problems with the battery and you need to replace it? Follow this easy guide to replacing the battery on your phone. You'll need the #000 Phillips screw driver, the Torx head T5, the tweezers, the metal spudger and the jimmy.

  1. UHmbEJTDN2OLfWs3
    UHmbEJTDN2OLfWs3
    u1xtOwggObEMIAuM
    YJGuxIfmDN63eHJa

    • Remove the plastic speaker grills by using the metal spudger to pry underneath the strips.

    • Peel off the plastic speaker grill to reveal the screws.

    • Heating up the plastic grills make them easier to remove.

    • Peeling off the plastic speaker grill will ruin the adhesive used to keep it in place. A new adhesive must be used to put the grill back on the device.

    Double sided tape can be used to adhere the grills in place.

    Lucano -

    How to make the Another adhesive??? Plz rply

    My razed Phone Speaker grills can't put again Perfectly

    Ferdi Pongbubun -

    Where can i find a Charging Connector for Razer Phone 2 to buy….becouse the only place i când find IT is in India and they only delyver to

    curteanuice13 -

  2. H14TwgyqMIkJmnDX
    H14TwgyqMIkJmnDX
    BkDNN5kKyRSldTnN

    • Pry the top plastic grill off with the metal spudger and reveal the screws.

  3. FFYYjPyDbPq1XdZJ
    FFYYjPyDbPq1XdZJ
    QyYAxMTteSFoIuUj
    3EEnv6vZHOU1MwwI

    • Remove five (two bottom, three top) 2.5 mm screws with the Phillips #000 screwdriver.

    • Remove five (four bottom, one top) 5.5 mm screws with the Torx Head T5 screwdriver.

  4. kcwmZhNLNg6vWoam
    kcwmZhNLNg6vWoam
    xsVG5oZj6x6Pbt1Y

    • Remove the display assembly by using the Jimmy to separate the assembly from the phone's frame.

    • Lift the display assembly away from the other half of the phone.

  5. 1XCCgfH2iSyUxOI6
    1XCCgfH2iSyUxOI6
    Y4juEudwmO43TcqZ
    reHbXBVY5VddEVBk

    • Remove one 2.5 mm screw holding down the metal bracket connector using the Phillips #000 screwdriver.

    • Peel back the metallic shielding over the connector using tweezers.

    • Remove the metal bracket connector.

    Hi you got any screen for sale thanks

    anwarhussain21786 -

  6. tasuVE43LOrXjn2I
    tasuVE43LOrXjn2I
    ed6WKXEFH2uA2upy

    • Grab hold of the the screen ribbon with the tweezers and remove it from the rest of the phone to free the assembly display.

    I would highly recommend avoid using metal tweezers for this step.

    Otherwise, be EXTREMELY careful with them when near the contacts around the ribbon cable.

    With the battery still plugged in, trying to unplug the ribbon connector of the screen with a metal tool will cause shorts between the tiny contacts.

    John Li -

  7. vXlZX43Orgn5toc1
    vXlZX43Orgn5toc1
    GISVkm6S3UnDnHMZ
    AxKpLX6SfwdBHdjS

    • Grab hold of the connector on the right side of the phone (just above the battery) using the tweezers.

    • Remove the connector.

  8. aQh6CGAQVy6yk4oh
    aQh6CGAQVy6yk4oh
    tteNHDomSD41gGpF

    • Remove the 2.5 mm screw holding down the bracket with a Phillips #000 screwdriver.

    • Grab the bracket with the tweezers and remove it.

    Careful.

    There's actually 2 screws you need to remove with this step before you can remove the bracket..

    John Li -

  9. VlqHdj4inUgNZoKG
    VlqHdj4inUgNZoKG
    euYCMEMALhuZbGDc
    rjOflBATp4HmiMea

    • Peel off and pull out the elastic tabs at the bottom of the battery.

    It isn’t necessary to remove the battery.

    Lucano -

  10. tisNMDmoYGMOQNpQ
    tisNMDmoYGMOQNpQ
    YjDjvKDBdakkDRsd

    • Carefully use the Jimmy to wedge the battery out of the phone.

    It isn’t necessary to remove the battery

    Lucano -

    Thank you very much.

    familykeepers.ca -

    battery razer phone 1 and 2 is the same type?

    my phone is razer phone 1, and only see online shop selling the battery for razer phone 2

    Alpha Jon -

    Where I can get the design specs for the razer phone 1 battery? I think they are not producing it anymore…

    h_yilei -

    It is 376989 in size I brought a 396787 but without the BMS board specs still cannot fix it.

    And also what is the Panasonic 777156? It has 6 pins under it, it seems not like a capacitor and cannot find replacement on digi-key.

    h_yilei -

    I used this guide to replace my battery for my Razer 2 phone and the front speaker grills have no screws at all. Had to access the battery from behind the phone. So apparently I have a different version of Razer 2 phone. So followed another guide and replaced the battery. Unfortunately, I had to deal with the speaker grills.

    Nick T -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Bryan

Mitglied seit: 24/01/19

628 Reputation

5 Kommentare

Hey tnx for this but how can i buy replacement battery? my battery lose energy so fast . 100 to 0 in 3 hours or less . :(

Kraytos Barzegar -

Where can I buy a battery and power button replacement for this phone

Kelly Sales -

It would be nice to be able to find a batter or one that is compatible. Mine is bloated and while i can get to it easily enough i cannot find a replacement. Even a non oem that would work would be nice.

Ronald Winfrey -

they dont have replacement batteries the only way is to buy a junk razer phone on ebay or a marketplace see if the battery is still functional and replace it as such ive had to do that and now my battery life is normal again

Wai-Ming Ham -

If you type rc30-0215 on AliExpress you’ll find the for the Razer Phone 1.

Raposo morto -