Razor A Handle Grips Replacement

Geschrieben von: Jordyn
  • Kommentare: 1
Razor A Handle Grips Replacement

Schwierigkeitsgrad

Moderate

Schritte

3

Zeitaufwand

15 - 20 Minuten

Einleitung

Do your hands hurt or slip when riding your scooter? Chances are your handle grips need to be replaced. This guide will show you how.

  1. s1lrN6STWcuJPVuH
    s1lrN6STWcuJPVuH
    BVULlKfMp1v2fgIN

    • If the scooter does not already have handle grips, skip to step 2.

    • Locate the handle grips at the upper ends of the T-tube.

    • Be careful to keep the scissors away from your other hand while cutting the handle grips.

    • Wedge one end of a pair of scissors between the metal T-tube and a handle grip, with the cutting edge toward the handle grip. Cut the handle grip off.

    • Repeat for the other handle grip.

  2. AKqJfrSGDQQXmDof
    AKqJfrSGDQQXmDof
    Ql4iOyfMo5E2BBbT

    • Soak the replacement handle grips in warm water for 2-3 minutes.

    • The longer you soak the handle grips in water, the larger they get. Soaking the handle grips for a long time will not damage them.

  3. cjwRw5TLbc3RNcJ1
    cjwRw5TLbc3RNcJ1
    ZxKwL6NCY3dS45DY

    • Each handle grip should now slide onto the T-tube with ease. If not, soak the handle grip(s) in warm water for another 1-3 minutes.

    • Holding the T-tube with one hand, slide a handle grip completely onto the T-tube.

    • Repeat for the other handle grip if installing both.

    • Let the handle grips dry for 24 hours before use.

Tinte & Feder

Jordyn

Mitglied seit: 10/10/12

523 Reputation

Ein Kommentar

I have found the Razor A5 Lux Scooter the best kick scooter for daily commuting.

Mathew Sam -