Einleitung
This guide will show how to reconnect the foot support to the wheelchair after it has fallen off.
Werkzeuge
-
-
Slide the footrest sockets down as shown and use a 10 mm wrench to tighten the bolts at the desired height.
-
-
-
Screw in the bolt attaching the footrest to the frame.
-
Screw in the lower bolt to the footrest.
-
Abschluss
Check that the footrest is at the desired height. If the footrest is still uncomfortable start the guide over again from step 1 using a different height to tighten bolts.
