Removing Fender Frontman 15r Back panel

Geschrieben von: Greg Sawers
  • Kommentare: 1
Removing Fender Frontman 15r Back panel

Schwierigkeitsgrad

Easy

Schritte

3

Zeitaufwand

5 Minuten

Einleitung

Need to get inside the amp? Remove the back panel!

  1. ep3XRhZ2rULdAFkN

    • Be sure to unplug the device before proceeding.

    • Use a Phillips #0 screwdriver to remove the four 21.7mm screws holding the back panel to the frame.

  2. kWXx3tHiDBTqRFam

    • Once the screws are out, use a plastic opening tool or spudger to pry the top of the back panel open. There may be some resistance, but it will eventually pry loose.

  3. aUKhpprZXvNQnf1B

    • Once the top is separated, use your hand to remove the back panel from the unit.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Greg Sawers

Mitglied seit: 27/09/12

85 Reputation

Ein Kommentar

I need to know where to find a used circuit board for my Fender Frontman 15G. A circuit board from a Fender Frontman 15R will also work. Please help me.

sparkyman401 -