Einleitung
This guide will show you how to remove the power supply on your HP Compaq dx2000MT.
-
-
Turn off your computer and remove the power cable by pulling it straight out of its socket.
-
-
-
Remove the side case door by pushing towards the rear of the device with your hand.
-
Once you slide the door back, remove it by pulling it outwards from the device.
-
-
-
Remove the side case door by pushing towards the rear of the device with your hand.
-
Once you slide the door back, remove it by pulling it outwards from the device.
-
-
-
Remove the 4 pin ATX power connector from the motherboard by pressing down the holding latch and pulling out towards the side of the device.
-
-
-
Remove the 20 pin ATX power connector from the motherboard by pressing down the holding latch and pulling out towards the side of the device.
-
-
-
Slide the power supply towards the front of the device
-
Then pull the power supply down and remove it from the case.
-
To reassemble your device, follow these instructions in reverse order.
