Removing Philips DC320 37 Bottom Panel

Geschrieben von: Greg Lane
  • Kommentare: 0
Removing Philips DC320 37 Bottom Panel

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

5 - 15 Minuten

Einleitung

Use this guide to open the dock and install other components.

  1. UHgWuSjPUcqaBAAP

    • Pry off the four white feet with the pointed end of the spudger

  2. V21CawLi2fTRLHrQ

    • Unscrew the four 15.5 mm Phillips #2 screws that hold the bottom panel to the dock.

  3. EVAJNaADthnDRWtk

    • Use the flat end of the spudger to pry the lid off from the two connectors holding it to the body of the dock.

    • The connectors on the panel are fragile and may break.

  4. AC4yGkktpFkIrau5
    AC4yGkktpFkIrau5
    4OAFMGFY6edvpdQ6
    CTAQrEGNPjMJkIUY

    • Carefully pull up and out the four electrical connectors and the two ribbon connectors connecting the bottom panel and the dock.

    • Electrical Connectors

    • Ribbon Connectors

    • The cables do not have a lot of slack in them. Be careful not to break the connectors.

    • One wire is soldered onto the bottom panel. Be careful not to break this bond.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Greg Lane

Mitglied seit: 16/04/13

9 Reputation

0 Kommentare