Einleitung
This guide will instruct you on how to remove the fan blade and transformer.
Werkzeuge
-
-
Use the Phillips #2 screwdriver to remove the four 6 mm screws by unscrewing counterclockwise.
-
-
-
Remove the Phillips 6 mm screw that holds the circuit board to the outer shell of the fan.
-
-
-
Remove the top cover containing the circuit board and the wires by pulling it away from the outer shell of the fan.
-
-
-
Remove the screws from the four corners of the circuit board.
-
Remove the circuit board from the top cover.
-
-
-
In order to remove the fan blade pliers were used to remove the holding nut.
-
After the holding nut is loose, use the pliers to pull up to remove the nut.
-
-
-
Remove the two bronze Phillips 29-mm bolts that hold the fan blade to the transformer.
-
Use a pair of pliers to hold the nut at the bottom of the transformer, as you unscrew from left-to-right at the top of the transformer. After, pull up and remove both the screw and nut.
-
-
-
Next, remove the two silver Phillips (8-mm head) 40-mm screws from the transformer.
-
The transformer should be free after this step.
-
To reassemble your device, follow these instructions in reverse order.
Hi I had the same problem where the fan would turn on it just wouldn't rotate. So I read all these solutions and right before I started to take the fan apart,my husband toke it and sprayed some WD-40,along the base above the plug where it rotates. Spray all around. Wait about 3mins,plug it in, and BAM it works great…. Thank God for husband's,
tiffany Gallardo -