Einleitung

Your WiFi card no longer works and you want to change it. You've come to the right place, this tutorial is for you.

  1. PQjALRJOV1toEmAZ
    • Pop the center cover open on the bottom cover.

    • Remove the center screw with a #00 Phillips screwdriver.

    • Use a T5 Torx screwdriver for the remaining screws around the edge of the bottom cover.

  2. aTsAitbJDBuSfWi1
    • Carefully remove back panel after all screws have been removed.

    I suggest sliding an opening tool along the front of the case first to pop the plastic snaps holding the cover to the bottom of the laptop. The snaps near the hinges are the most challenging. It is also important, when following these directions in reverse order, to fit the right side of the case over the sliding power switch before applying downward pressure required to snap the case bottom back into place. Wouldn’t want to break your power switch.

    Jeremy Tilden -

  3. dMqN3cTM34jLpS4o
    • After the back panel has been removed, disconnect the battery to prevent electrical shock

  4. IhmDnYLPyoC1bZ1k
    • Use a Phillips #00 screwdriver to remove the 8 screws that secure the battery.

  5. HgcclMZKOf5ijIvp
    • Once all the screws have been removed the battery is now safe to extract

  6. OcVUg3JtXMHRuOwT
    OcVUg3JtXMHRuOwT
    BxZWkidrJHJtXZKy
    luVew6wiEoh6bmuJ
    • We removed the battery to avoid electric shocks.

    • Disconnect the two wires from the WiFi card. You can do this with a pair of pliers or your fingernail.

    • Remove the screw with a #00 Phillips screwdriver.

    • Now remove your WiFi card to replace it.

Abschluss

To reassemble your device, follow the instructions in reverse order.

Schwarzer

Mitglied seit: 07/08/19

4689 Reputation

0 Kommentare